Cyber Services / All lessons / CentOS / Linux Administration / Network File System (NFS)

Network File System (NFS)

Module 24 of 33 · 3 min read · Free to read

MODULES ↓ Command blocks have a COPY button

Creating Centralized, Shareable Storage on CentOS — Easy Student Steps

If you’re learning Linux and have more than one machine, you’ll need to share files between them. Network File System (NFS) lets you do that — easily. One machine (the server) shares a folder, and other machines (clients) can use it like it’s their own. No copying. No USB drives. Just one folder, many machines.

This guide walks you through every step — in simple, clear language — so you can set it up without confusion.

What is NFS? (Explained Simply)

NFS is a way for computers to share folders over a network — like a “network drive” in Windows, but for Linux.

Think of It Like a Shared Whiteboard

Imagine the NFS Server is a classroom whiteboard. The NFS Client is a student with a window looking directly at that whiteboard. Whatever the teacher writes on the board, the student sees instantly. If the student could reach through the window to write on it, everyone else would see it too. That’s NFS — one shared space, visible and editable from many machines.

ComponentWhat It DoesWhat You Need to Do
NFS Server The machine that owns and shares the folder. Install NFS, create a folder, say who can access it, start services, open firewall.
NFS Client The machine that uses the shared folder. Install NFS, create a mount point, connect to server, test, make it permanent.

Step-by-Step: Setting Up the NFS Server

Let’s say your server’s IP address is 192.168.1.200. We’ll share a folder called /srv/nfs/shared_data with all computers in the 192.168.1.0/24 network (like your home or classroom lab).

  1. Step 1: Install NFS

    Open a terminal and run:

    sudo dnf install -y nfs-utils
  2. Step 2: Create the Shared Folder
    sudo mkdir -p /srv/nfs/shared_data
    sudo chown nfsnobody:nfsnobody /srv/nfs/shared_data
    sudo chmod 2770 /srv/nfs/shared_data
  3. Step 3: Configure the /etc/exports File

    This file tells NFS what to share and with whom. Edit it with:

    sudo vim /etc/exports

    Then add this line:

    /srv/nfs/shared_data  192.168.1.0/24(rw,sync,no_root_squash)

    Deconstructing the Options

    • rw: Clients can **r**ead and **w**rite files.
    • sync: Safer — waits until data is saved to disk before replying.
    • no_root_squash: Lets root users on clients act as root on the server. ⚠️ Use only in trusted networks like labs.
  4. Step 4: Start and Enable the Services
    sudo systemctl enable --now nfs-server
    sudo systemctl enable --now rpcbind
    sudo systemctl enable --now mountd
  5. Step 5: Configure the Firewall

    Open the required ports:

    sudo firewall-cmd --add-service=nfs --permanent
    sudo firewall-cmd --add-service=rpc-bind --permanent
    sudo firewall-cmd --add-service=mountd --permanent
    sudo firewall-cmd --reload
  6. Step 6: Apply the Exports

    Make your share active without rebooting:

    sudo exportfs -rav

✅ Server Setup Complete!

Your server is now sharing /srv/nfs/shared_data with your network. Time to connect from a client machine!

Step-by-Step: Setting Up the NFS Client

Now, on another CentOS machine (your laptop, VM, or friend’s computer), let’s connect to the server.

  1. Step 1: Install NFS Packages
    sudo dnf install -y nfs-utils
  2. Step 2: Create a Mount Point

    This is where the shared folder will appear locally:

    sudo mkdir -p /mnt/shared
  3. Step 3: Mount the Share Temporarily
    sudo mount 192.168.1.200:/srv/nfs/shared_data /mnt/shared
  4. Step 4: Verify the Mount is Working

    Check that the mount shows up:

    df -h

    You should see a line like:

    192.168.1.200:/srv/nfs/shared_data   49G  2.0G   47G   5% /mnt/shared

    Now test by creating a file:

    touch /mnt/shared/test-file.txt

    Go to the server and check:

    ls -l /srv/nfs/shared_data

    If you see test-file.txt — it’s working! 🎉

  5. Step 5: Make the Mount Persistent

    Edit /etc/fstab to auto-mount on boot:

    The _netdev Option is Critical

    Always include _netdev for network mounts. It tells the system to wait until the network is ready — avoiding boot failures.

    Add this line to /etc/fstab:

    192.168.1.200:/srv/nfs/shared_data /mnt/shared   nfs   defaults,_netdev   0   0

    Test it without rebooting:

    sudo umount /mnt/shared
    sudo mount -a

✅ Client Setup Complete!

Your client will now automatically connect to the shared folder on every boot. Use /mnt/shared just like any local folder!

Modules (33) ← CentOS / Linux Administration