Cyber Services / All lessons / Diploma in Network Technology / Connector Types

Connector Types

Module 8 of 36 · 3 min read · Free to read

MODULES ↓ Command blocks have a COPY button

Your Gateway to a Career in Network Engineering

Connector Types: RJ-45, RJ-11, and Fiber Connectors

While cables are the pathways for data, connectors are the critical physical interfaces that allow us to plug those pathways into our network devices. Using the wrong connector—or terminating the right connector incorrectly—can lead to network failure. This section identifies the most common connectors you will encounter in copper and fiber optic networking.

RJ-45 (Registered Jack 45)

The RJ-45 connector is the undisputed standard for modern Ethernet networking. If you've ever plugged a computer into a wired network, you have used an RJ-45 connector.

  • Physical Description: A plastic plug with 8 pin positions to accommodate the 8 wires (4 twisted pairs) in an Ethernet cable.
  • Key Feature: A flexible locking tab on the top that "clicks" when properly inserted into a jack, securing the connection.
  • Common Use: Terminating UTP and STP copper cables to connect computers, switches, routers, IP phones, and other network hardware.

RJ-11 (Registered Jack 11)

The RJ-11 is the standard connector for telephone lines. While it looks like a smaller version of an RJ-45, its purpose and wiring are completely different.

  • Physical Description: A smaller plastic plug with 6 pin positions, though typically only 2 or 4 pins are actively used for standard phone lines.
  • Key Feature: Its smaller size is the most obvious identifier when compared to an RJ-45.
  • Common Use: Connecting analog telephones to wall jacks and connecting DSL modems to phone lines.

Technician's Tip: Never Mix RJ-11 and RJ-45

An RJ-11 plug can physically fit into the center of a larger RJ-45 jack. Do not do this. It will not create a network connection and can permanently damage the outer pins (1, 2, 7, 8) of the RJ-45 jack, rendering it useless for future Ethernet connections.

Fiber Optic Connectors

Fiber optic connectors are precision-engineered to align the microscopic glass cores of two fiber cables, ensuring that light can pass between them with minimal loss. There are many types, but three are especially common in enterprise networks.

Summary: Connectors at a Glance

Connector Common Use Physical Characteristics # of Wires / Fibers
RJ-45 Ethernet Networking 8-pin, plastic plug with locking tab. 8 Wires (4 Pairs)
RJ-11 Telephone & DSL Lines Smaller 6-pin plug. 2, 4, or 6 Wires
LC Connector High-Density Fiber Small, square, plastic, push-tab lock. 1 Fiber (Simplex) or 2 (Duplex)
SC Connector General Purpose Fiber Larger, square, plastic, push-pull lock. 1 Fiber (Simplex) or 2 (Duplex)
ST Connector Legacy Fiber Round, metal, bayonet (twist) lock. 1 Fiber (Simplex)
Modules (36) ← Diploma in Network Technology